Tel
+852-61343425
News
-
Final Random Inspection Checklist | Key Quality Metrics
A Random Inspection (FRI) must be conducted once at least 80% of the order is packed. Following AQL sampling standards (such as 2.5/4.0), the process enforces a strict zero-tolerance policy for Critical defects, with a primary focus on evaluating functionRead more -
First-Time vs. Annual Factory Audit | How Often to Check
Initial audits prioritize the verification of credentials and production capacity, while annual audits are recommended every 12 months to ensure consistent quality. Any score falling below 70% triggers a mandatory re-audit within six months. Adhering to aRead more -
When to Book a Factory Audit | Sourcing vs. Pre-Production
We highly recommend conducting a factory audit prior to paying a deposit. During the sourcing phase, verifying ISO 9001 certification and production capacity can mitigate 80% of quality risks, while the pre-production stage should focus on checking raw maRead more -
What is the Electronics Inspection | What Do QC Inspectors Actually Test
QC inspectors carry out electronic inspections based on IPC industry standards, performing 100% visual and power-on tests. By focusing specifically on tiny PCB solder joints and voltage anomalies, they effectively screen out over 98% of potential defects,Read more -
Electronics Inspection | Why Do You Need Third-Party QC
Engaging professional third-party QC to conduct sampling inspections based on AQL standards can precisely intercept critical hazards such as short circuits. This approach reduces electronic product defect rates by over 30%, effectively preventing costly rRead more
